As an Amazon Associate, I earn from qualifying purchases.
In the previous article, we made a detailed comparison between electric vs. gas pressure washer to help you choose the one that fits your needs.
After you choose an appropriate unit, we continue guiding you on how to use a pressure washer to wash cars and surface cleaner. Do you know it?
In the following post, we will list step by step on cleaning a car and driveway.
Follow me!!!
Table of Contents
How To Use Pressure Washer To Wash Car And Surface Cleaner?
Cleaning a Car
Step 1 – Choose the Right Nozzle
It would be best to set your pressure washer at 1200 – 1900 PSI to wash your car. For safe use, experts recommend utilizing a 1.4-1.6GPM machine.
You need to choose the appropriate nozzle used with your pressure washer to make sure water is distributed evenly, in particular:
| Degree – Color | Use |
| 00 – Red |
|
| 150 – Yellow |
|
| 250 – Green |
|
| 400 – White |
|
Step 2 – Select a Good Area to Wash
The best plan would be to park in an open space, away from things that you do not want to make them wet. Don’t forget an outlet if you are using an electric pressure washer.
Wash Your Car with a Pressure Washer
Step 3 – Start Rinsing Your Car
Initially, you need to prepare a pressure washer, water outlet, electric outlet (if you use an electric machine), and 25-degree tip.
Next, you follow four steps below:
- Plug in the pressure washer in the prepared electrical source in case you utilize an electric model.
- Connect the pressure washer to a water outlet.
- Join a 250 tip with the washer nozzle.
- Start the operation of your pressure washer and spray.
Ensure that you rinse both the wheels and the whole body of your car. You should also wash the tires to remove dirt from hubcaps.
Step 4 – Apply Detergent
First of all, you dilute the detergent by pouring it and water into a bucket. Now, pour that mixture into the detergent tank of your pressure washer. Then, spray it on your car.
Step 5 – Rinse Detergent off Your Car
In this step, you switch the tip of the pressure machine to the 400 tip for rinsing the detergent and continue switching the output from the detergent tank to the water source and remove the cleaner.
Cleaning a Concrete Driveway
We will start cleaning a concrete driveway in 6 steps as follow:
Use a Pressure Washer to Clean a Driveway
1 – You need to clean the things that can obstruct your job, including vehicles, kid toys, or others.
2 – A 250 nozzle is appropriate to clean the concrete driveway. So, attach it to your pressure washer and turn the machine on. You need to get rid of grass, leaves, branches, and pebbles.
3 – You will apply detergent in this step. Prioritize to use the suitable driveway cleaners for your pressure unit. Remember to attach the soap nozzle designed to soak your driveway before starting spraying.
4 – Leave the detergent in 5 minutes.
5 – Five minutes are enough for the detergent to break down mildew, dirt, grime, and other tough stains. We use a surface cleaner attachment to help complete the clean quickly and minimize driveway damage from pressure.
6 – Use a 250 nozzle to remove all the detergent, mildew, grime, and dirt from your concrete driveway.
Do You Know How to Use a Pressure Washer?
We believe that you might know how to use a pressure washer to wash car and surface cleaner after reading our article.
In the case you want to clean a brick driveway, you can follow the steps like cleaning a concrete one.
Follow our site to know more other useful information!
Have fun cleaning!!!